 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DISCRETE SEMICONDUCTORS DATA SHEET ook, halfpage M3D186 PBSS4140S 40 V low VCEsat NPN transistor Product specification 2001 Nov 27 Philips Semiconductors Product specification 40 V low VCEsat NPN transistor FEATURES * High power dissipation (830 mW) * Ultra low collector-emitter saturation voltage * 1 A continuous current * High current switching * Improved device reliability due to reduced heat generation. APPLICATIONS * Medium power switching and muting * Linear regulators * DC/DC converter * LCD back-lighting * Supply line switching circuits * Battery driven equipment (mobile phones, video cameras and hand-held devices). handbook, halfpage PBSS4140S QUICK REFERENCE DATA SYMBOL VCEO IC ICM RCEsat PINNING PIN 1 2 3 base collector emitter DESCRIPTION PARAMETER collector-emitter voltage collector current (DC) peak collector current equivalent on-resistance MAX. UNIT 40 1 2 <500 V A A m 1 DESCRIPTION NPN low VCEsat transistor in a SOT54 plastic package. PNP complement: PBSS5140S. MARKING TYPE NUMBER PBSS4140S MARKING CODE S4140S 2 3 1 2 MAM459 3 Fig.1 Simplified outline (SOT54) and symbol. LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL VCBO VCEO VEBO IC ICM IBM Ptot Tstg Tj Tamb Note 1. Device mounted on a printed-circuit board, single-sided copper, tinplated and standard footprint. PARAMETER collector-base voltage collector-emitter voltage emitter-base voltage collector current (DC) peak collector current peak base current total power dissipation storage temperature junction temperature operating ambient temperature Tamb 25 C; note 1 CONDITIONS open emitter open base open collector - - - - - - - -65 - -65 MIN. MAX. 40 40 5 1 2 1 830 +150 150 +150 V V V A A A mW C C C UNIT 2001 Nov 27 2 Philips Semiconductors Product specification 40 V low VCEsat NPN transistor THERMAL CHARACTERISTICS SYMBOL Rth j-a Note PARAMETER thermal resistance from junction to ambient CONDITIONS in free air; note 1 PBSS4140S VALUE 150 UNIT K/W 1. Device mounted on a printed-circuit board, single-sided copper, tinplated and standard footprint. CHARACTERISTICS Tamb = 25 C unless otherwise specified. SYMBOL ICBO ICEO IEBO hFE PARAMETER collector-base cut-off current collector-emitter cut-off current emitter-base cut-off current DC current gain CONDITIONS VCB = 40 V; IC = 0 VCB = 40 V; IC = 0; Tamb = 150 C VCE = 30 V; IB = 0 VEB = 5 V; IC = 0 VCE = 5 V; IC = 1 mA VCE = 5 V; IC = 500 mA VCE = 5 V; IC = 1 A VCEsat collector-emitter saturation voltage IC = 100 mA; IB = 1 mA IC = 500 mA; IB = 50 mA IC = 1 A; IB = 100 mA RCEsat VBEsat VBEon fT Cc Note 1. Pulse test: tp 300 s; 0.02. equivalent on-resistance base-emitter saturation voltage base-emitter turn-on voltage transition frequency collector capacitance IC = 500 mA; IB = 50 mA; note 1 IC = 1 A; IB = 100 mA VCE = 5 V; IC = 1 A IC = 50 mA; VCE = 10 V; f = 100 MHz VCB = 10 V; IE = Ie = 0; f = 1 MHz - - - - 300 300 200 - - - - - - 150 - MIN. - - - - - - - - - - 260 - - - - TYP. MAX. 100 50 100 100 - 900 - 200 250 500 <500 1.2 1.1 - 10 mV mV mV m V V MHz pF UNIT nA A nA nA 2001 Nov 27 3 Philips Semiconductors Product specification 40 V low VCEsat NPN transistor PBSS4140S handbook, halfpage 1000 MHC077 handbook, halfpage (1) 10 MHC078 hFE 800 VBE (V) 600 (2) 1 400 (3) (1) (2) (3) 200 0 10-1 1 10 102 103 104 IC (mA) 10-1 10-1 1 10 102 103 104 IC (mA) VCE = 5 V. (1) Tamb = 150 C. (2) Tamb = 25 C. (3) Tamb = -55 C. VCE = 5 V. (1) Tamb = -55 C. (2) Tamb = 25 C. (3) Tamb = 150 C. Fig.2 DC current gain as a function of collector current; typical values. Fig.3 Base-emitter voltage as a function of collector current; typical values. 103 handbook, halfpage VCEsat (mV) MHC079 102 handbook, halfpage RCEsat () MHC080 102 (1) 10 (2) (3) 10 1 (1) (2) (3) 1 1 10 102 103 IC (mA) 104 10-1 10-1 1 10 102 103 104 IC (mA) IC/IB = 10. (1) Tamb = 150 C. (2) Tamb = 25 C. (3) Tamb = -55 C. IC/IB = 10. (1) Tamb = 150 C. (2) Tamb = 25 C. (3) Tamb = -55 C. Fig.4 Collector-emitter saturation voltage as a function of collector current; typical values. Fig.5 Equivalent on-resistance as a function of collector current; typical values. 2001 Nov 27 4 Philips Semiconductors Product specification 40 V low VCEsat NPN transistor PBSS4140S handbook, halfpage 400 MHC081 fT (MHz) 300 200 100 0 0 200 400 600 800 1000 IC (mA) VCE = 10 V. Fig.6 Transition frequency as a function of collector current. 2001 Nov 27 5 Philips Semiconductors Product specification 40 V low VCEsat NPN transistor PACKAGE OUTLINE Plastic single-ended leaded (through hole) package; 3 leads PBSS4140S SOT54 c E d A L b 1 D 2 e1 e 3 b1 L1 0 2.5 scale 5 mm DIMENSIONS (mm are the original dimensions) UNIT mm A 5.2 5.0 b 0.48 0.40 b1 0.66 0.56 c 0.45 0.40 D 4.8 4.4 d 1.7 1.4 E 4.2 3.6 e 2.54 e1 1.27 L 14.5 12.7 L1(1) 2.5 Note 1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities. OUTLINE VERSION SOT54 REFERENCES IEC JEDEC TO-92 EIAJ SC-43 EUROPEAN PROJECTION ISSUE DATE 97-02-28 2001 Nov 27 6 Philips Semiconductors Product specification 40 V low VCEsat NPN transistor DATA SHEET STATUS DATA SHEET STATUS(1) Objective data PRODUCT STATUS(2) Development DEFINITIONS PBSS4140S This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A. Preliminary data Qualification Product data Production Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 2001 Nov 27 7 Philips Semiconductors - a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. (c) Koninklijke Philips Electronics N.V. 2001 SCA73 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 613514/01/pp8 Date of release: 2001 Nov 27 Document order number: 9397 750 08839 |
Price & Availability of PBSS5140S
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |